Maslak Mah. Ahi Evran Caddesi Polaris Plaza Kat:10 34485 Sarıyer/İstanbul
iletisim@btegitim.com +90 (212) 274 69 98

Implementing Cisco IP Switched Networks (SWITCH)

Eğitim İçeriği
Hakkında

Enterprise environments require networks designed for performance, availability and scalability to achieve outcomes. Seasoned IT professionals with progressive end-to-end network design expertise are crucial to ensure networks deliver to today's requirements while future proofing investments. For Senior Network Design Engineers, Principle System Engineer, Network/Solution Architects and CCDA professionals looking to build upon your fundamental Cisco network design expertise the Cisco CCDP certification program focuses on advanced addressing and routing protocols, WANs, services virtualization, and integration strategies for multi-layered Enterprise architectures.

 

Exams & Recommended Training

Required Exam(s) Recommended Training
300-101 ROUTE Implementing Cisco IP Routing (ROUTE)
300-115 SWITCH Implementing Cisco IP Switched Networks (SWITCH)
300-320 ARCH Designing Cisco Network Service Architectures (ARCH)


Önkoşullar

The knowledge and skills that a learner must have before attending this Curriculum are as follows:

 

  • Describing network fundamentals
  • Establishing Internet and WAN connectivity (IPv4 and IPv6)
  • Managing network device security
  • Operating a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree
  • Troubleshooting IP connectivity (IPv4 and IPv6)
  • Configuring and troubleshooting EIGRP and OSPF (IPv4 and IPv6)
  • Configuring devices for SNMP, Syslog, and NetFlow access
  • Managing Cisco device configurations, Cisco IOS images, and licenses

It is highly recommended that this course be taken after the following Cisco courses:

 

  • Interconnecting Cisco Networking Devices v2.0, Part 1 (ICND1 v2.0) and Part 2 (ICND2 v2.0)
  • Interconnecting Cisco Networking Devices: Accelerated version 2.0 (CCNAX v2.0)


Kurs İçeriği

SWITCH v2.0, 5 day ILT, includes major updates and follows an updated blueprint. However, note that this course does not cover all items listed on the blueprint. Some older topics have been removed or simplified, while several new IPv6 routing topics have been added. Course content has been adapted to Cisco IOS Software Release 15 and technically updated. Course also introduces new type of labs, called discovery labs. Discovery labs are instructor guided lab through which student explores new topics in an interactive way. All labs are developed only as virtual labs. To get the full course experience, you should cover everything, including Introduction, Discovery labs, Summary, and Module Self-Check.

 

This course is part of the following Certifications:

  • Cisco Certified Design Professional (CCDP)
  • Cisco Certified Network Professional Routing and Switching (CCNP)

It is highly recommended that this course be taken after the following Cisco courses:

  • Interconnecting Cisco Network Devices Part 1 (ICND1) and Interconnecting Cisco Network Devices Part 2 (ICND2), or
  • Interconnecting Cisco Network Devices: Accelerated (CCNAX)
  •  


Kurs Hedefleri

Upon completing this course, the learner will be able to meet these overall objectives:

 

  • Describe the hierarchical campus structure, basic switch operation, use of SDM templates, PoE, and LLDP
  • Implement VLANs, trunks, explain VTP, implement DHCP in IPv4 and IPv6 environment, and configure port aggregation
  • Implement and optimize STP mechanism that best suits your network - PVSTP+, RPVSTP+, or MSTP
  • Configure routing on a multilayer switch
  • Configure NTP, SNMP, IP SLA, port mirroring, and verify StackWise and VSS operation
  • Implement First Hop redundancy in IPv4 and IPv6 environments
  • Secure campus network according to recommended practices


Ders İçeriği

Detailed Course Outline

Module 1: Basic Concepts and Network Design
  • Analyzing Campus Network Structure
  • Comparing Layer 2 and Multilayer Switches
  • Using Cisco SDM Templates
  • Implementing LLDP
  • Implementing PoE
Module 2: Campus Network Architecture
  • Implementing VLANs and Trunks
  • Introducing VTP
  • Implementing DHCP
  • Implementing DHCP for IPv6
  • Configuring Layer 2 Port Aggregation
Module 3: Spanning Tree Implementation
  • Implementing RSTP
  • Implementing STP Stability Mechanisms
  • Implementing MST
Module 4: Inter-VLAN Routing
  • Implementing Inter-VLAN Routing Using a Router
  • Configuring a Switch to Route
Module 5: High-Availability Networks
  • Configuring Network Time Protocol
  • Implementing SNMP Version 3
  • Implementing the Cisco IOS IP SLA
  • Implementing Port Mirroring for Monitoring Support
  • Verifying Switch Virtualization
Module 6: First Hop Redundancy Protocol Implementation
  • Configuring Layer 3 Redundancy with HSRP
  • Configuring Layer 3 Redundancy with VRRP
  • Configuring Layer 3 Redundancy with GLBP
  • Configuring First Hop Redundancy Protocol for IPv6
Module 7: Campus Network Security
  • Implementing Port Security
  • Implementing Storm Control
  • Implementing Access to External Authentication
  • Mitigating Spoofing Attacks
  • Securing VLAN Trunks
  • Configuring PVLANs
Labs
  • Investigating the CAM
  • Configuring VLANs and Trunks
  • VTP Operation
  • Exploring DHCP
  • Obtaining IPv6 Addresses Dynamically
  • EtherChannel Configuration and Load Balancing
  • Discovering and Modifying STP Behavior
  • Root Guard
  • Configuring MST
  • Routing with an External Router
  • Routing on a Multilayer Switch
  • NTP Configuration
  • IP SLA Echo Configuration
  • Configuring and Tuning HSRP
  • Configure VRRP and Spot the Differences from HSRP
  • Configure GLBP
  • Port Security


Kimler Katılmalı

A network professional who will need to correctly implement switch-based solutions given a network design using Cisco IOS services and features. The typical job roles for this type of professional are network engineers, network operations center (NOC) technical support personnel, or help desk technicians.

And also, any individual involved in network operations and support.



Sınavlar

300-115 SWITCH



EĞİTİM TAKVİMİ

BTEĞİTİM İSTANBUL (SWITCH)

Başlangıç Tarihi: 16 Eylül 2019 Bitiş Tarihi: 20 Eylül 2019 Eğitim Zamanı: 5 gün
Eğitim içeriği, ücreti, tarih ve detaylı bilgi için :

+90 (212) 274 69 98

egitim@btegitim.com

İLETİŞİM FORMU

Eğitim içeriğini PDF olarak indir
Teknoloji
Cisco
Kariyer Sertifika Eğitimleri
Design
CCDP
Implementing Cisco IP Switched Networks (SWITCH)
Bilgi Talebi


TAKİP ET
ADRES
Maslak Mah. Ahi Evran Caddesi Polaris Plaza Kat:10 34485 Sarıyer/İstanbul
Eskişehir Yolu 7.Km Mustafa Kemal Mah. 2123. Sok No:2-D Cepa Ofis Kule Kat: 5 Daire:504 Çankaya/Ankara
 
BT EĞİTİM ® bir Morten Bilgi ve İletişim Hizmetleri A.Ş. markasıdır.

YETKİLİ CISCO EĞİTİM MERKEZİ
Real Time Analytics